In the systemd-run --scope mode, --no-block has no actual effect and will
be silently ignored. Therefore, this combination is explicitly rejected to
reduce confusion for users when using it.
Fixes: #42806
Otherwise in systems with OpenSSL 3 the journal contains multiple error
entries because the preferred library libcrypto.so.4 is not present.
Follow-up for ccdd42351f
This updates systemd-tpm2-setup to create and persist an endorsement
key if there isn't one already. For each supported EK template profile,
it will read the EK certificate from its NV index if there is one.
When there is an EK certificate present, a primary key is created using
the corresponding template. If the resulting EKpub matches the public
key in the certificate, the created EK is persisted and the process is
complete.
The low-range templates and the high-range RSA 2048/3072 and ECC NIST
P256/P384 storage templates are supported, as detailed in section
5.3 of the "TCG EK Credential Profile For TPM Family 2.0" spec v2.7.
High-range templates are preferred because these permit EK usage without
requiring knowledge of the authorization value for the endorsement
hierarchy, meaning that, like with the SRK, it is possible to restrict
the usage of the endorsement hierarchy whilst still permitting use of
the persistent EK.
The EK is always persisted at handle 0x81010001. This handle is
reserved in Table 2 of the "TCG TPM v2.0 Provisioning Guidance" spec
v1.0r1.0, although this is only a recommendation. This
handle is within the block of handles reserved for endorsement
primary keys in the "Registry of Reserved TPM 2.0 Handles and
Localities" spec v1.2r1.00. Section 2.3.2 of this specification also
makes a suggestion that there should be a relationship between the EK
certificate NV index and a corresponding persistent EK handle by
using handles at the same offsets within their respective ranges.
However, this contradicts the provisioning guidance spec which reserves
0x81010001 when there isn't a certificate at 0x01c00001. For simplicity,
I've chosen to use a single handle for the EK regardless of which profile
it is created with.
The "TCG EK Credential Profile For TPM Family 2.0" spec also provides a
way for endorsement keys to be certified with non-standard templates by
storing the template in a NV index. This is also supported.
The EK creation is not executed with tpm2-setup --early, as there's no
need for it to be created so early, unlike with the SRK. I also haven't
stored EKpub in /var/lib/systemd like with the SRKpub, as I'm not sure
there will be a use case for this yet.
A follow-up PR may be needed to add some internal helpers to make use
of the persisted EK, as use of low-range EKs requires a policy session.
High-range EKs can be used with a HMAC session because they have the
userWithAuth attribute set and we are creating them with an empty
authorization value.
https://trustedcomputinggroup.org/resource/http-trustedcomputinggroup-org-wp-content-uploads-tcg-ek-credential-profile/https://trustedcomputinggroup.org/resource/tcg-tpm-v2-0-provisioning-guidance/https://trustedcomputinggroup.org/resource/registry/
Similar to PR#42360 this commit adds missing properties for
absolute path handling in io.systemd.Unit.StartTransient for
the `Exec` context and a macro helper to share the common code.
The properties added are:
IPCNamespacePath, NetworkNamespacePath, RootDirectory, RootHashPath,
RootHashSignaturePath, RootImage, RootVerity, UserNamespacePath,
RootMStack.
Note that RootHashPath, RootHashSignaturePath need custom apply
functions because the varlink name "RootHashPath" differs from the
name that needs to be written into the unit file ("RootHash=")
and the iovec must be cleared.
In various cases we'll touch the same directories multiple times with
mtools: for example the /loader/ dir itself. Unfortunately mtools' mmd
does not implement a graceful "-p" switch like mkdir, but will do some
interactive name clash thing instead. We can turn this off via "-Ds
-DS", so let's do that. But that's not enough since the tool will still
fail with a non-explanatory exit status of 1. This hence ignores that
failure and proceeds anyway, under the assumption that failures to
create a directory will sooner or later be detected anyway once the
directory is to be populated and turns out not be existing because the
creation failed.
This makes some integration test/mkosi invocations work
non-interactively again.
Follow-up for f191ca982c
SMBIOS OEM strings are host-controlled and normally distrusted by PID1
in confidential VMs. Under TDX, however, the SMBIOS table (including
Type 11) is measured into RTMR0 by the firmware (TDVF), so a remote
verifier can detect host tampering with credentials delivered this
way. Accept them there, while keeping fw_cfg distrusted as those
items are not measured even on TDX.
This lets systemd-vmspawn deliver credentials to TDX guests via the
normal SMBIOS path, unlike SNP which requires the initrd cpio channel.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Add more shutdown timestamps, export them via D-Bus/Varlink, use them in
`systemd-analyze time`, and preserve them across kexec via LUO. This is
useful to measure reboot performance with added measurement points and
more granular intervals.
Previously we would return a valid signature containing the empty
outblob, which is undesirable. In other cases where we cannot query a
report because the guest doesn't support it we currently return an
empty response so the signature aggregator in systemd-report silently
skips it. In this case, we have everything we need to actually get a
report on the guest side, but the host isn't providing us with the
quote, so we fail.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
To query a TD quote, the TDX guest must connect to the Quote Generation
Service (QGS), a SGX enclave running on the host. We check if the
service is exposed via a well-known unix socket, then pass that socket
or a fallback well-known vsock address to QEMU.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Wire up --coco=tdx alongside the existing SEV-SNP path. TDX requires KVM
on x86_64, a raw TDVF firmware loaded via -bios (no pflash/NVRAM split),
kernel-irqchip=split, and the "host" CPU model since QEMU rejects named
models. Sets up the tdx-guest object and confidential-guest-support=tdx0.
TDX measurement is different from QEMU's kernel-hashes injection: TDX
provides runtime measurements via RTMRs, so the initial measurement only
covers the firmware, which then measures the rest of the boot chain into
those RTMRs (done by OVMF today). Therefore a restriction to direct
kernel boot isn't required either.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Until now the SHUTDOWN_START/FINISH timestamps were carried across a
soft-reboot in the same fields, so afterwards they described the
previous boot rather than the current one, mixing current- and
previous-boot data in the same set. Mirror what is now done on kexec
and move them into the PREVIOUS_SHUTDOWN_* fields on deserialization.
Also reset local timestamps for events that rerun (eg: generators,
units loading, etc) on soft-reboot and switch-root.
This test never finishes in Ubuntu autopkgtest with the current values,
and is currently skipped all together on Debian. When running on either,
reduce the number of disks to make the test more reliable.
journal_file_read_tail_timestamp() is called unconditionally in
next_beyond_location() for every file on every iteration step,
resulting in O(N x files) volatile mmap reads. For large queries
like 'journalctl -n 1000000' this makes the command unusably slow
(~5 minutes on systems with many journal files).
Rather than suppressing the call entirely (which would make the
inotify path fully load-bearing for cross-boot ordering), rate-limit
it to at most once per second per file. This reduces the overhead
from O(N x files) to O(T x files) where T is the iteration time in
seconds, while still providing periodic refresh as a fallback for
any missed inotify events and keeping cross-boot ordering
reasonably fresh.
Embed a RateLimit struct in JournalFile for this purpose.
Measured improvement on a real system: 5:24 -> 2:39 (-51%) for
'journalctl -n 1000000'.
Fixes: #42521
Regression introduced in: #26355 (34af74946e)
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
systemd-run(1) hard-coded "the default" wording for KillUserProcesses=, but the
actual compile-time default is determined by the -Ddefault-kill-user-processes=
meson build option, which distributions set differently at packaging time.
Consistent with logind.conf(5).
Fixes: #42805
Signed-off-by: Shihao Ren <renshihao.rsh@gmail.com>
When the random seed file doesn't exist but we have good entropy
(seeded_by_efi=true), we attempt to create it. This requires a handle
to the \loader\ directory, which may not exist on systems using
UKI+EFISTUB without systemd-boot installed.
Obtain the directory handle by first trying a read-only open; if that
returns EFI_NOT_FOUND, create the directory. We deliberately avoid
requesting write access on an already-present directory because some
firmware implementations return EFI_INVALID_PARAMETER for a
WRITE|CREATE open on an existing directory — this would be logged at
LOG_ERR and abort seed creation on systems where \loader\ exists but
random-seed does not (the normal systemd-boot layout).
Once a handle to \loader\ is obtained, open the seed file relative to
that handle rather than using the full path from root.
Introduced-by: c0e7046c17 ("boot: log about RO I/O errors at debug level.")
Fixes: #42801
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
The output array is allocated with new() and left uninitialized, but a
bare unset "$VAR" token expands to nothing and writes no terminator.
When such a token leads or is the only word, the returned strv is left
without a trailing NULL.
Follow-up for f331434d13
Otherwise in systems with OpenSSL 3 the journal contains multiple error entries
because the preferred library libssl.so.4 is not present.
Follow-up for 6caa50183e
varlink_call_and_log() does not hand out a new reference for the reply
object, so the caller should not unref it. The _cleanup_(sd_json_variant_unrefp)
on reply was therefore wrong from the start.
The original TAKE_PTR(reply) was working around this incorrect cleanup
by preventing it from firing, but that left reply's refcount one too
high after sd_json_variant_ref(v) incremented the parent's count.
Fix by dropping _cleanup_(sd_json_variant_unrefp) from the reply
variable declaration entirely, as suggested by Lennart Poettering.
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
We already record when shutdown.target is initiated (ShutdownStart).
This adds a few more measuring points during shutdown: when
shutdown.target completes (i.e., all units stopped), when the shutdown
binary starts executing, and immediately before it hands off to the
kernel.
Obviously these are immediately lost upon reboot. But they will later
be wired in LUO so they get preserved on kexec, and can be inspected,
which is very useful for performance measurements.
When setenv("CREDENTIALS_DIRECTORY") fails, log_error_errno() was
called with the stale return value of exec_context_get_credential_directory()
(which is >= 0 on success) instead of errno.
The %m in the format string correctly expands from libc's errno, so
the human-readable log message was unaffected. However, the structured
journal field ERRNO= received an incorrect value (0 or positive),
making automated log analysis and alerting on this failure unreliable.
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
When using --slice-inherit, setting arg_slice would inadvertently munge
user.slice into the current user slice, usually producing a slice name
like user-1000-user.slice. This is treated as a user-UID slice by
user-.slice.d/10-defaults.conf, resulting in a strange description:
literally "User slice for UID user" (instead of an actual user UID).
Keep arg_slice empty when using --slice-inherit so that we actually
inherit from the relevant slice instead of a munged version.
Fixes: #42601
Otherwise in systems with OpenSSL 3 the journal contains multiple error entries
because the preferred library libcrypto.so.4 is not present.
Follow-up for ccdd42351f
receive_portable_metadata() reads each item into a stack buffer of
PATH_MAX + NAME_MAX + 2 bytes, passes the full sizeof() as the recv
iovec length, and then NUL-terminates with iov_buffer[n] = 0. recvmsg()
can return n equal to the buffer size, so the terminator is written one
byte past the end.
Grow the buffer by one byte and cap the iovec at sizeof - 1, so a full
record is still received and the trailing NUL always fits, matching the
coredump-receive.c reader.
Align the documentation with the actual behavior: if $XDG_CONFIG_HOME is
set to an absolute path in the user service manager environment, it takes
precedence over the default ~/.config/ when locating environment.d files.
Also note the bootstrapping limitation that variables defined inside
environment.d files are not yet available when the generator runs.
Fixes: #42777
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
Both glibc and musl provides dgettext(). Hence it is not necessary to
use libintl.so provided by gettext.
This partially reverts 590e226437,
fully reverts commit e6e65dc261 and
bd19ffd9cb.
Then, introduce minimal libintl.h for musl build, to avoid using
libintl.h by gettext, which is typically installed on musl-based
build systems.
