@@ -906,8 +906,9 @@
* @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
* (or GO) interface (i.e. hostapd) to ask for unexpected frames to
* implement sending deauth to stations that send unexpected class 3
* frames. Also used as the event sent by the kernel when such a frame
* is received .
* frames. For NAN_DATA interfaces, this is used to report frames from
* unknown peers (A2 not assigned to any active NDP) .
* Also used as the event sent by the kernel when such a frame is received.
* For the event, the %NL80211_ATTR_MAC attribute carries the TA and
* other attributes like the interface index are present.
* If used as the command it must have an interface index and you can
@@ -1361,6 +1362,59 @@
* user space that the NAN new cluster has been joined. The cluster ID is
* indicated by %NL80211_ATTR_MAC.
*
* @NL80211_CMD_INCUMBENT_SIGNAL_DETECT: Once any incumbent signal is detected
* on the operating channel in 6 GHz band, userspace is notified with the
* signal interference bitmap using
* %NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP. The current channel
* definition is also sent.
*
* @NL80211_CMD_NAN_SET_LOCAL_SCHED: Set the local NAN schedule. NAN must be
* operational (%NL80211_CMD_START_NAN was executed). Must contain
* %NL80211_ATTR_NAN_TIME_SLOTS and %NL80211_ATTR_NAN_AVAIL_BLOB, but
* %NL80211_ATTR_NAN_CHANNEL is optional (for example in case of a channel
* removal, that channel won't be provided).
* If %NL80211_ATTR_NAN_SCHED_DEFERRED is set, the command is a request
* from the device to perform an announced schedule update. See
* %NL80211_ATTR_NAN_SCHED_DEFERRED for more details.
* If not set, the schedule should be applied immediately.
* @NL80211_CMD_NAN_SCHED_UPDATE_DONE: Event sent to user space to notify that
* a deferred local NAN schedule update (requested with
* %NL80211_CMD_NAN_SET_LOCAL_SCHED and %NL80211_ATTR_NAN_SCHED_DEFERRED)
* has been completed. The presence of %NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS
* indicates that the update was successful.
* @NL80211_CMD_NAN_SET_PEER_SCHED: Set the peer NAN schedule. NAN
* must be operational (%NL80211_CMD_START_NAN was executed).
* Required attributes: %NL80211_ATTR_MAC (peer NMI address) and
* %NL80211_ATTR_NAN_COMMITTED_DW.
* Optionally, the full schedule can be provided by including all of:
* %NL80211_ATTR_NAN_SEQ_ID, %NL80211_ATTR_NAN_CHANNEL (one or more), and
* %NL80211_ATTR_NAN_PEER_MAPS (see &enum nl80211_nan_peer_map_attrs).
* If any of these three optional attributes is provided, all three must
* be provided.
* Each peer channel must be compatible with at least one local channel
* set by %NL80211_CMD_SET_LOCAL_NAN_SCHED. Different maps must not
* contain compatible channels.
* For single-radio devices (n_radio <= 1), different maps must not
* schedule the same time slot, as the device cannot operate on multiple
* channels simultaneously.
* When updating an existing peer schedule, the full new schedule must be
* provided - partial updates are not supported. The new schedule will
* completely replace the previous one.
* The peer schedule is automatically removed when the NMI station is
* removed.
* @NL80211_CMD_NAN_ULW_UPDATE: Notification from the driver to user space
* with the updated ULW blob of the device. User space can use this blob
* to attach to frames sent to peers. This notification contains
* %NL80211_ATTR_NAN_ULW with the ULW blob.
* @NL80211_CMD_NAN_CHANNEL_EVAC: Notification to indicate that a NAN
* channel has been evacuated due to resource conflicts with other
* interfaces. This can happen when another interface sharing the channel
* resource with NAN needs to move to a different channel (e.g., channel
* switch or link switch on a BSS interface).
* The notification contains %NL80211_ATTR_NAN_CHANNEL attribute
* identifying the evacuated channel.
* User space may reconfigure the local schedule in response to this
* notification.
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1624,6 +1678,18 @@ enum nl80211_commands {
NL80211_CMD_NAN_NEXT_DW_NOTIFICATION ,
NL80211_CMD_NAN_CLUSTER_JOINED ,
NL80211_CMD_INCUMBENT_SIGNAL_DETECT ,
NL80211_CMD_NAN_SET_LOCAL_SCHED ,
NL80211_CMD_NAN_SCHED_UPDATE_DONE ,
NL80211_CMD_NAN_SET_PEER_SCHED ,
NL80211_CMD_NAN_ULW_UPDATE ,
NL80211_CMD_NAN_CHANNEL_EVAC ,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2651,7 +2717,8 @@ enum nl80211_commands {
* a flow is assigned on each round of the DRR scheduler.
* @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION). Can be set
* only if %NL80211_STA_FLAG_WME is set.
* only if %NL80211_STA_FLAG_WME is set (except for NAN, which uses WME
* anyway).
*
* @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
* in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
@@ -2983,6 +3050,95 @@ enum nl80211_commands {
* @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable
* this feature during association. This is a flag attribute.
* Currently only supported in mac80211 drivers.
* @NL80211_ATTR_NAN_CHANNEL: This is a nested attribute. There can be multiple
* attributes of this type, each one represents a channel definition and
* consists of top-level attributes like %NL80211_ATTR_WIPHY_FREQ.
* When used with %NL80211_CMD_NAN_SET_LOCAL_SCHED, it specifies
* the channel definitions on which the radio needs to operate during
* specific time slots. All of the channel definitions should be mutually
* incompatible. With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and
* %NL80211_ATTR_NAN_RX_NSS are mandatory.
* When used with %NL80211_CMD_NAN_SET_PEER_SCHED, it configures the
* peer NAN channels. In that case, the channel definitions can be
* compatible to each other, or even identical just with different RX NSS.
* With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and
* %NL80211_ATTR_NAN_RX_NSS are mandatory.
* The number of channels should fit the current configuration of channels
* and the possible interface combinations.
* If an existing NAN channel is changed but the chandef isn't, the
* channel entry must also remain unchanged.
* When used with %NL80211_CMD_NAN_CHANNEL_EVAC, this identifies the
* channels that were evacuated.
* @NL80211_ATTR_NAN_CHANNEL_ENTRY: a byte array of 6 bytes. contains the
* Channel Entry as defined in Wi-Fi Aware (TM) 4.0 specification Table
* 100 (Channel Entry format for the NAN Availability attribute).
* @NL80211_ATTR_NAN_RX_NSS: (u8) RX NSS used for a NAN channel. This is
* used with %NL80211_ATTR_NAN_CHANNEL when configuring NAN channels with
* %NL80211_CMD_NAN_SET_LOCAL_SCHED or %NL80211_CMD_NAN_SET_PEER_SCHED.
* @NL80211_ATTR_NAN_TIME_SLOTS: an array of u8 values and 32 cells. each value
* maps a time slot to the chandef on which the radio should operate on in
* that time. %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled.
* The chandef is represented using its index, where the index is the
* sequential number of the %NL80211_ATTR_NAN_CHANNEL attribute within all
* the attributes of this type.
* Each slots spans over 16TUs, hence the entire schedule spans over
* 512TUs. Other slot durations and periods are currently not supported.
* @NL80211_ATTR_NAN_AVAIL_BLOB: (Binary) The NAN Availability attribute blob,
* including the attribute header, as defined in Wi-Fi Aware (TM) 4.0
* specification Table 93 (NAN Availability attribute format). Required with
* %NL80211_CMD_NAN_SET_LOCAL_SCHED to provide the raw NAN Availability
* attribute. Used by the device to publish Schedule Update NAFs.
* @NL80211_ATTR_NAN_SCHED_DEFERRED: Flag attribute used with
* %NL80211_CMD_NAN_SET_LOCAL_SCHED. When present, the command is a
* request from the device to perform an announced schedule update. This
* means that it needs to send the updated NAN availability to the peers,
* and do the actual switch on the right time (i.e. at the end of the slot
* after the slot in which the updated NAN Availability was sent). Since
* the slots management is done in the device, the update to the peers
* needs to be sent by the device, so it knows the actual switch time.
* If the flag is not set, the schedule should be applied immediately.
* When this flag is set, the total number of NAN channels from both the
* old and new schedules must not exceed the allowed number of local NAN
* channels, because with deferred scheduling the old channels cannot be
* removed before adding the new ones to free up space.
* @NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS: flag attribute used with
* %NL80211_CMD_NAN_SCHED_UPDATE_DONE to indicate that the deferred
* schedule update completed successfully. If this flag is not present,
* the update failed.
* @NL80211_ATTR_NAN_NMI_MAC: The address of the NMI station to which this NDI
* station belongs. Used with %NL80211_CMD_NEW_STATION when adding an NDI
* station.
* @NL80211_ATTR_NAN_ULW: (Binary) The initial ULW(s) as published by the
* peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 109
* (Unaligned Schedule attribute format). Used to configure the device
* with the initial ULW(s) of a peer, before the device starts tracking it.
* @NL80211_ATTR_NAN_COMMITTED_DW: (u16) The committed DW as published by the
* peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 80
* (Committed DW Information field format).
* @NL80211_ATTR_NAN_SEQ_ID: (u8) The sequence ID of the peer schedule that
* %NL80211_CMD_NAN_SET_PEER_SCHED defines. The device follows the
* sequence ID in the frames to identify newer schedules. Once a schedule
* with a higher sequence ID is received, the device may stop communicating
* with that peer until a new peer schedule with a matching sequence ID is
* received.
* @NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME: (u16) The maximum channel switch
* time, in microseconds.
* @NL80211_ATTR_NAN_PEER_MAPS: Nested array of peer schedule maps.
* Used with %NL80211_CMD_NAN_SET_PEER_SCHED. Contains up to 2 entries,
* each containing nested attributes from &enum nl80211_nan_peer_map_attrs.
*
* @NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP: u32 attribute specifying
* the signal interference bitmap detected on the operating bandwidth for
* %NL80211_CMD_INCUMBENT_SIGNAL_DETECT. Each bit represents a 20 MHz
* segment, lowest bit corresponds to the lowest 20 MHz segment, in the
* operating bandwidth where the interference is detected. Punctured
* sub-channels are included in the bitmap structure; however, since
* interference detection is not performed on these sub-channels, their
* corresponding bits are consistently set to zero.
*
* @NL80211_ATTR_UHR_OPERATION: Full UHR Operation element, as it appears in
* association response etc., since it's abridged in the beacon. Used
* for START_AP etc.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -3557,6 +3713,26 @@ enum nl80211_attrs {
NL80211_ATTR_UHR_CAPABILITY ,
NL80211_ATTR_DISABLE_UHR ,
NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP ,
NL80211_ATTR_UHR_OPERATION ,
NL80211_ATTR_NAN_CHANNEL ,
NL80211_ATTR_NAN_CHANNEL_ENTRY ,
NL80211_ATTR_NAN_TIME_SLOTS ,
NL80211_ATTR_NAN_RX_NSS ,
NL80211_ATTR_NAN_AVAIL_BLOB ,
NL80211_ATTR_NAN_SCHED_DEFERRED ,
NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS ,
NL80211_ATTR_NAN_NMI_MAC ,
NL80211_ATTR_NAN_ULW ,
NL80211_ATTR_NAN_COMMITTED_DW ,
NL80211_ATTR_NAN_SEQ_ID ,
NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME ,
NL80211_ATTR_NAN_PEER_MAPS ,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST ,
@@ -3650,6 +3826,9 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_OCB: Outside Context of a BSS
* This mode corresponds to the MIB variable dot11OCBActivated=true
* @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
* @NL80211_IFTYPE_NAN_DATA: NAN data interface type (netdev); NAN data
* interfaces can only be brought up (IFF_UP) when a NAN interface
* already exists and NAN has been started (using %NL80211_CMD_START_NAN).
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -3671,6 +3850,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_DEVICE ,
NL80211_IFTYPE_OCB ,
NL80211_IFTYPE_NAN ,
NL80211_IFTYPE_NAN_DATA ,
/* keep last */
NUM_NL80211_IFTYPES ,
@@ -4359,6 +4539,46 @@ enum nl80211_band_attr {
# define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
/**
* enum nl80211_nan_phy_cap_attr - NAN PHY capabilities attributes
* @__NL80211_NAN_PHY_CAP_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET: 16-byte attribute containing HT MCS set
* @NL80211_NAN_PHY_CAP_ATTR_HT_CAPA: HT capabilities (u16)
* @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR: HT A-MPDU factor (u8)
* @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY: HT A-MPDU density (u8)
* @NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET: 8-byte attribute containing VHT MCS set
* @NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA: VHT capabilities (u32)
* @NL80211_NAN_PHY_CAP_ATTR_HE_MAC: HE MAC capabilities
* @NL80211_NAN_PHY_CAP_ATTR_HE_PHY: HE PHY capabilities
* @NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET: HE supported NSS/MCS combinations
* @NL80211_NAN_PHY_CAP_ATTR_HE_PPE: HE PPE thresholds
* @NL80211_NAN_PHY_CAP_ATTR_MAX: highest NAN PHY cap attribute number
* @__NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST: internal use
*/
enum nl80211_nan_phy_cap_attr {
__NL80211_NAN_PHY_CAP_ATTR_INVALID ,
/* HT capabilities */
NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_HT_CAPA ,
NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR ,
NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY ,
/* VHT capabilities */
NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA ,
/* HE capabilities */
NL80211_NAN_PHY_CAP_ATTR_HE_MAC ,
NL80211_NAN_PHY_CAP_ATTR_HE_PHY ,
NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_HE_PPE ,
/* keep last */
__NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST ,
NL80211_NAN_PHY_CAP_ATTR_MAX = __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST - 1
} ;
/**
* enum nl80211_wmm_rule - regulatory wmm rule
*
@@ -4480,6 +4700,10 @@ enum nl80211_wmm_rule {
* as a non-primary subchannel. Only applicable to S1G channels.
* @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel
* in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_CAC_START_TIME: Channel Availability Check (CAC)
* start time (CLOCK_BOOTTIME, nanoseconds). Only present when CAC is
* currently in progress on this channel.
* @NL80211_FREQUENCY_ATTR_PAD: attribute used for padding for 64-bit alignment
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4530,6 +4754,8 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_16MHZ ,
NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY ,
NL80211_FREQUENCY_ATTR_NO_UHR ,
NL80211_FREQUENCY_ATTR_CAC_START_TIME ,
NL80211_FREQUENCY_ATTR_PAD ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST ,
@@ -5466,6 +5692,8 @@ enum nl80211_bss_status {
* @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
* @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
* @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange
* @NL80211_AUTHTYPE_IEEE8021X: IEEE 802.1X authentication utilizing
* Authentication frames
* @__NL80211_AUTHTYPE_NUM: internal
* @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
* @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -5482,6 +5710,7 @@ enum nl80211_auth_type {
NL80211_AUTHTYPE_FILS_SK_PFS ,
NL80211_AUTHTYPE_FILS_PK ,
NL80211_AUTHTYPE_EPPKE ,
NL80211_AUTHTYPE_IEEE8021X ,
/* keep last */
__NL80211_AUTHTYPE_NUM ,
@@ -6795,6 +7024,11 @@ enum nl80211_feature_flags {
* frames in both non‑
* "IEEE P802.11bi/D3.0, 12.16.6".
*
* @NL80211_EXT_FEATURE_IEEE8021X_AUTH: Driver supports IEEE 802.1X
* authentication utilizing Authentication frames with user space SME
* (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in
* "IEEE P802.11bi/D4.0, 12.16.5".
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -6873,6 +7107,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_BEACON_RATE_EHT ,
NL80211_EXT_FEATURE_EPPKE ,
NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION ,
NL80211_EXT_FEATURE_IEEE8021X_AUTH ,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES ,
@@ -8517,6 +8752,8 @@ enum nl80211_s1g_short_beacon_attrs {
* @NL80211_NAN_CAPA_CAPABILITIES: u8 attribute containing the
* capabilities of the device as defined in Wi-Fi Aware (TM)
* specification Table 79 (Capabilities field).
* @NL80211_NAN_CAPA_PHY: nested attribute containing band-agnostic
* capabilities for NAN data path. See &enum nl80211_nan_phy_cap_attr.
* @__NL80211_NAN_CAPABILITIES_LAST: Internal
* @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute.
*/
@@ -8529,9 +8766,38 @@ enum nl80211_nan_capabilities {
NL80211_NAN_CAPA_NUM_ANTENNAS ,
NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME ,
NL80211_NAN_CAPA_CAPABILITIES ,
NL80211_NAN_CAPA_PHY ,
/* keep last */
__NL80211_NAN_CAPABILITIES_LAST ,
NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1 ,
} ;
/**
* enum nl80211_nan_peer_map_attrs - NAN peer schedule map attributes
*
* Nested attributes used within %NL80211_ATTR_NAN_PEER_MAPS to define
* individual peer schedule maps.
*
* @__NL80211_NAN_PEER_MAP_ATTR_INVALID: Invalid
* @NL80211_NAN_PEER_MAP_ATTR_MAP_ID: (u8) The map ID for this schedule map.
* @NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS: An array of u8 values with 32 cells.
* Each value maps a time slot to a channel index within the schedule's
* channel list (%NL80211_ATTR_NAN_CHANNEL attributes).
* %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled.
* @__NL80211_NAN_PEER_MAP_ATTR_LAST: Internal
* @NL80211_NAN_PEER_MAP_ATTR_MAX: Highest peer map attribute
*/
enum nl80211_nan_peer_map_attrs {
__NL80211_NAN_PEER_MAP_ATTR_INVALID ,
NL80211_NAN_PEER_MAP_ATTR_MAP_ID ,
NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS ,
/* keep last */
__NL80211_NAN_PEER_MAP_ATTR_LAST ,
NL80211_NAN_PEER_MAP_ATTR_MAX = __NL80211_NAN_PEER_MAP_ATTR_LAST - 1 ,
} ;
# define NL80211_NAN_SCHED_NOT_AVAIL_SLOT 0xff
# endif /* __LINUX_NL80211_H */
Yu Watanabe