gmtime_r() will return NULL in that case, and we would crash.
I committed the reproducer case in fuzz-regressions/, even though we don't have
ubsan hooked up yet. Let's add it anyway in case it is useful in the future. We
actually crash anyway when compiled with asserts, so this can be easily
reproduced without ubsan.
oss-fuzz #6886.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
ISO C does not allow empty statements outside of functions, and gcc
will warn the trailing semicolons when compiling with -pedantic:
warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
But our code cannot compile with -pedantic anyway, at least because
warning: ISO C does not support ‘__PRETTY_FUNCTION__’ predefined identifier [-Wpedantic]
Without -pedatnic, clang and even old gcc (3.4) generate no warnings about
those semicolons, so let's just drop __useless_struct_to_allow_trailing_semicolon__.
Quite often we need to set up a number of fds as stdin/stdout/stderr of
a process we are about to start. Add a generic implementation for a
routine doing that that takes care to do so properly:
1. Can handle the case where stdin/stdout/stderr where previously
closed, and the fds to set as stdin/stdout/stderr hence likely in the
0..2 range. handling this properly is nasty, since we need to first
move the fds out of this range in order to later move them back in, to
make things fully robust.
2. Can optionally open /dev/null in case for one or more of the fds, in
a smart way, sharing the open file if possible between multiple of
the fds.
3. Guarantees that O_CLOEXEC is not set on the three fds, even if the fds
already were in the 0..2 range and hence possibly weren't moved.
At various places we only want to close fds if they are not
stdin/stdout/stderr, i.e. fds 0, 1, 2. Let's add a unified helper call
for that, and port everything over.
I figure sooneror later we'll have more of these docs, hence let's give
them a clean place to be.
This leaves NEWS and README/README.md as well as the LICENSE texts in
the root directory of the project since that appears to be customary for
Free Software projects.
There isn't much difference, but in general we prefer to use the standard
functions. glibc provides reallocarray since version 2.26.
I moved explicit_bzero is configure test to the bottom, so that the two stdlib
functions are at the bottom.
gcc warns about unitialized memory access because it notices that ssize_t which
is < 0 could be cast to positive int value. We know that this can't really
happen because only -1 can be returned, but OTOH, in principle a large
*positive* value cannot be cast properly. This is unlikely too, since xattrs
cannot be too large, but it seems cleaner to just use a size_t to return the
value and avoid the cast altoghter. This makes the code simpler and gcc is
happy too.
The following warning goes away:
[113/1502] Compiling C object 'src/basic/basic@sta/xattr-util.c.o'.
In file included from ../src/basic/alloc-util.h:28:0,
from ../src/basic/xattr-util.c:30:
../src/basic/xattr-util.c: In function ‘fd_getcrtime_at’:
../src/basic/macro.h:207:60: warning: ‘b’ may be used uninitialized in this function [-Wmaybe-uninitialized]
UNIQ_T(A,aq) < UNIQ_T(B,bq) ? UNIQ_T(A,aq) : UNIQ_T(B,bq); \
^
../src/basic/xattr-util.c:155:19: note: ‘b’ was declared here
usec_t a, b;
^
$ sudo systemd-run -p RootDirectory=/usr -E LD_LIBRARY_PATH=/lib/systemd/ -E SYSTEMD_LOG_LEVEL=debug /bin/systemd-detect-virt
Before
systemd-detect-virt[18498]: No virtualization found in DMI
systemd-detect-virt[18498]: No virtualization found in CPUID
systemd-detect-virt[18498]: Virtualization XEN not found, /proc/xen does not exist
systemd-detect-virt[18498]: This platform does not support /proc/device-tree
systemd-detect-virt[18498]: Failed to check for virtualization: No such file or directory
The first four lines are at debug level, so the user would only see that last
one usually, which is not very enlightening.
This now becomes:
systemd-detect-virt[21172]: No virtualization found in DMI
systemd-detect-virt[21172]: No virtualization found in CPUID
systemd-detect-virt[21172]: Virtualization XEN not found, /proc/xen does not exist
systemd-detect-virt[21172]: This platform does not support /proc/device-tree
systemd-detect-virt[21172]: /proc/cpuinfo not found, assuming no UML virtualization.
systemd-detect-virt[21172]: This platform does not support /proc/sysinfo
systemd-detect-virt[21172]: Found VM virtualization none
systemd-detect-virt[21172]: none
We do more checks, which is good too.
Then it can be used in the asserts in logging functions without causing
infinite recursion. The error is just printed to stderr, it should be
good enough for the common case.
gcc-8 throws an error if it knows snprintf might truncate output and the
return value is ignored:
../src/udev/udev-builtin-net_id.c: In function 'dev_pci_slot':
../src/udev/udev-builtin-net_id.c:297:47: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%s/%s/address", slots, dent->d_name);
^~
../src/udev/udev-builtin-net_id.c:297:17: note: 'snprintf' output between 10 and 4360 bytes into a destination of size 4096
snprintf(str, sizeof str, "%s/%s/address", slots, dent->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Let's check all return values. This actually makes the code better, because there's
no point in trying to open a file when the name has been truncated, etc.
If log_do_header() was called with overly long parameters, it'd generate
improper output. Essentially, it'd be truncated at random point, in particular
missing a newline at the end, so it'd run with the next field, usually MESSAGE=.
log_do_header is called with parameters from compiled code (file name, lien
nubmer, etc), so in practice this was unlikely to ever be a problem, but it is
possible. In particular, if systemd was compiled from sources in some deeply
nested directory (which happens for example in mock and other build roots), the
filename could be very long.
As a safety measure, let's truncate all parameters to 256 bytes. So we have
5 fields which are 256 bytes (plus the field name prefix), and a few other
fields with fixed width. This must always fit in the 2048 byte buffer.
I don't think there's much gain in calculating the required length precisely,
since it's a lot of fields and a few bytes allocated on the stack don't matter.
log_dispatch_internal has only one caller where the extra_field/extra
params are not null: log_unit_full. When log_unit_full() was called,
when we got to log_dispatch_internal, our header would look like this:
PRIORITY=7
SYSLOG_FACILITY=3
CODE_FILE=../src/core/manager.c
CODE_LINE=2145
CODE_FUNC=manager_invoke_sigchld_event
USER_UNIT=gnome-terminal-server.service
65dffa7a3b984a6d9a46f0b8fb57710bUSER_INVOCATION_ID=
SYSLOG_IDENTIFIER=systemd
It took me a while to understand why I'm not seeing mangled messages in the
journal (after all, "" is a valid rvalue for log messages). The answer is that
journald rejects any field name which starts with a digit, and the MESSAGE_ID
that was used here starts with a digit. Hence, those lines would be silently
filtered out.
This patch adds safe_atoux16 for parsing an unsigned hexadecimal 16bit int, and
uses that for parsing USB device and vendor IDs.
This fixes a compile error with gcc-8 because while we know that USB IDs are 2 bytes,
the compiler does not know that.
../src/udev/udev-builtin-hwdb.c:80:38: error: '%04X' directive output may be
truncated writing between 4 and 8 bytes into a region of size between 2 and 6
[-Werror=format-truncation=]
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com>
This is an attempt to improve #8228 a bit, by extending the /run/nologin
a bit, but still keeping it somewhat brief.
On purpose I used the vague wording "unprivileged user" rather than
"non-root user" so that pam_nologin can be updated to disable its
behaviour for members of the "wheel" group one day, and our messages
would still make sense.
See #8228.
So far, we had two implementations of reboot-with-parameter doing pretty
much the same. Let's unify that in a generic implementation used by
both.
This is particulary nice as it unifies all /run/systemd/reboot-param
handling in a single .c file.
This is primarily preparation for a follow-up commit that adds a common
implementation of the other side of the reboot parameter file, i.e. the
code that reads the file and issues reboot() for it.
This mimics the raw_clone() call we have in place already and
establishes a new syscall wrapper raw_reboot() that wraps the kernel's
reboot() system call in a bit more low-level fashion that glibc's
reboot() wrapper. The main difference is that the extra "arg" argument
is supported.
Ultimately this just replaces the syscall wrapper implementation we
currently have at three places in our codebase by a single one.
With this change this means that all our syscall() invocations are
neatly separated out in static inline system call wrappers in our header
functions.
Previously, we'd try to open kmsg on failure of the journal/syslog even
if no automatic fallback to kmsg was requested — and we wouldn't even
use the open connection afterwards...
