I was looking into a question posed in one of the Fedora discussion threads:
is it OK for a package to assume that files in different directories under /usr
are always on the same mount point? rpmlint emits a warning if a package has
files that are hardlinked between directories, i.e. rpmlint thinks that this
is not the case. But in practice, our systems are like this and our tooling
generally doesn't expect a part of /usr to be separated out. I looked at the
MOUNT_REQUIREMENTS document, but it doesn't answer this question clearly.
It was clearly written with the assumption that e.g. "/usr/" or "/var/" are one
mount point, so when it is "mounted", all of it is available. But the document
also talks about submounts being pulled in through requirements on specific
units, which requires some mounts not to be mounted all at once, so the reader
is left without any direct answer to this question.
This rewrite makes the following changes:
- rename "generally three categories of requirements" to
"three general categories of mount points" because we're categorizing
mount points, not requirements.
- always repeat the category name in further mentions,
e.g. "2/early" instead of just "2" so the reader doesn't have to jump
back to the table when reading.
- mention that it is OK for a mount point to be not split out
- say that submount which is "conceptually separate" may be mounted
later.
- say "ephemeral system" instead of "stateless system" and split out
the description of those systems into a separate paragraph and clearly
state that they are an exception that skips the requirements listed in
this document.
- be consistent in specifying the boundary before which each category must
have been mounted. Previously, cat. 1 was described as "before transisition"
and cat. 2 was described as "during early boot", which created the additional
problem that later we needed to contradict this saying that "must be mounted
during early boot" doesn't actually mean that and this can be done ealier.
If we say "before end of early boot", we avoid this awkwardness.
(cherry picked from commit 3e94ae6f1e)
See https://gitlab.gnome.org/GNOME/glib/-/issues/2931 for the changes in
GLib upstream. Using `GMemoryMonitor` is now more compliant with the
systemd recommended approach, but it needs further work to read the
recommended environment variables rather than unconditionally accessing
the per-cgroup PSI kernel file directly.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
(cherry picked from commit 69f1a1d5ed)
This has been tripping up container manager people. let's document this
explicitly.
(Note that the container interface could really use some updates, i.e.
it was written before a time where cgroup namespacing was a thing. But I
am too lazy to fix that now, so let's just add this once facet.)
(cherry picked from commit 32f4e30be5)
0x1770 is 6000, not 60000. It looks like 60000 is intended (the next
range starts at 60000 in both decimal and hex), so use that.
1000 to 60000 is 59001 users, as the range is inclusive on both sides.
Similar off-by-one for one of the "unused" ranges. After these changes,
the sizes of the ranges up to and including the "-1" ID sum up to 65536,
as expected.
I'm not sure where the size of the unused range after the container UID
range came from, but it is not correct (the "Container UID" and this
reserved range combined would be larger than the "HIC SVNT LEONES" 2^31
to 2^32-2 range...). Fix it.
It is unfortunate that the first half of this table makes more sense in
decimal while the second half makes more sense in hex (which would also
make the size in 65536 chunks easy to obtain): I'm tempted to add a
"sizes in hex" column...
(cherry picked from commit 1599b6fbe2)
Those lists were partially wrong and partially outdated. We should generate
this document automatically, but let's revisit this topic after the conversion
to sphinx. For now, as a stop-gap solution, I generated the lists from
the new 'systemd-analyze transient-settings' command.
Currently, when running "systemctl preset-all --root=xxx" in mkosi
to enable/disable units for initrds, the system presets are used.
The problem with this approach is that the system presets are written
for the system, and that is not necessarily ideal for an initrd, but we
still want to use the same packages in the initrd that we install in the
system, so let's introduce a separate directory for initrd presets which
is used to pick up preset files from when we detect that we're configuring
an initrd (by looking for /etc/initrd-release).
We also introduce a systemd preset file for the initrd, which is based on
the system one, except with all the stuff unnecessary for the initrd removed.
[1] says:
> Since 0.60.0 the name argument is optional and defaults to the basename of
> the first output
We specify >= 0.62 as the supported version, so drop the duplicate name in all cases
where it is the same as outputs[0], i.e. almost all cases.
[1] https://mesonbuild.com/Reference-manual_functions.html#custom_target
I still am annoyed that this wasn't documented properly when the
inhibitor locks where modified, even though raised multiple times in PR
reviews.
Follow-up for: #30307
See: #34091
Some user record providers might want to implement case-insensitive user
record matching, or other forms of non-normalized matching. So far
uderdb didn't allow that, because client's typically revalidate the
returned user records against the search keys (at least our clients do)
– they check if the search user name is actually part of the user record
and its aliases.
In order to support such lookups we thus need to allow the looup keys to
be part of the user record, but also not be persisted in it, because
the number of casings/spellings of a username might be ridiculously
high.
A nice way out is to allow "aliases" not only in the main part of the
record, but also in the "status" part, that contains information
dynamically determined at query time. We can insert a second "aliases"
field there, which the parser will then merge with the primary "aliases"
field, but the existing rules around "status" ensure tha the data is
never persisted.
Follow-up: e2e1f38f5a
Some configuration files that need updates are directly under in /etc. To
update them atomically, we need write access to /etc. For Ubuntu Core this is
an issue as /etc is not writable. Only a selection of subdirectories can be
writable. The general solution is symlinks or bind mounts to writable places.
But for atomic writes in /etc, that does not work. So Ubuntu has had a patch
for that that did not age well.
Instead we would like to introduce some environment variables for alternate
paths.
* SYSTEMD_ETC_HOSTNAME: /etc/hostname
* SYSTEMD_ETC_MACHINE_INFO: /etc/machine-info
* SYSTEMD_ETC_LOCALTIME: /etc/localtime
* SYSTEMD_ETC_LOCALE_CONF: /etc/locale.conf
* SYSTEMD_ETC_VCONSOLE_CONF: /etc/vconsole.conf
* SYSTEMD_ETC_ADJTIME: /etc/adjtime
While it is for now expected that there is a symlink from the standard, we
still try to read them from that alternate path. This is important for
`/etc/localtime`, which is a symlink, so we cannot have an indirect symlink or
bind mount for it.
Since machine-id is typically written only once and not updated. This commit
does not cover it. An initrd can properly create it and bind mount it.
Previously, systemd-networkd sent machine ID as chassis ID.
Let's use application specific machine ID.
This is a kind of backward compat breaking. Hence, this also introduces
the support of $SD_LLDP_SEND_MACHINE_ID environment variable.
Closes#37613.
In multi-seat scenarios, a display manager might need to start multiple
greeter sessions. But systemd allows at most one graphical session per
user. So, display managers now have a range of UIDs to dynamically
allocate users for their greeter sessions.
In preparation for adopting forward declarations to reduce unnecessary
transitive includes across the tree, let's introduce a forward.h header
with forward declarations for all libc, libsystemd, basic and shared types.
Additionally, this header exports all basic integer types and errno constants,
as well as all macros including assertions macros. These header files contain
types often used in headers and are always included in every source file one
way or another anyway.
To avoid having to include memory-util.h and alloc-util.h in forward.h, we
split off the parts we need from both into cleanup-util.h and only include
cleanup-util.h in forward.h.
To keep this commit self-contained, we include cleanup-fundamental.h and
cleanup-util.h from the headers that originally contained the same macros.
We'll remove these again in a later commit that optimizes the includes in
src/basic and src/fundamental.
Split out of #37364
Add support for a sysfail boot entry. Sysfail boot entries can be used
for optional tweaking the automatic selection order in case a failure
state of the system in some form is detected (boot firmware failure
etc).
The EFI variable `LoaderEntrySysFail` contains the sysfail boot loader
entry to use. It can be set using bootctl:
```
$ bootctl set-sysfail sysfail.conf
```
The `LoaderEntrySysFail` EFI variable would be unset automatically
during next boot by `systemd-boot-clear-sysfail.service` if no system
failure occured, otherwise it would be kept as it is and a system
failure reason will be saved to `LoaderSysFailReason` EFI variable.
`sysfail_check()` expected to be extented to support possibleconditions
when we should boot sysfail("recovery") boot entry.
Also add support for using a sysfail boot entry in case of UEFI firmware
capsule update failure [1]. The status of a firmware update is obtained
from the EFI System Resource Table (ESRT), which provides an optional
mechanism for identifying device and system firmware resources for the
purposes of targeting firmware updates to those resources.
Current implementation uses the value of LastAttemptStatus field from
ESRT, which describes the result of the last firmware update attempt for
the firmware resource entry. The field is updated each time an
`UpdateCapsule()` is attempted for an ESRT entry and is preserved across
reboots (non-volatile).
This can be be used in setups with support for A/B OTA updates, where
the boot firmware and Linux/RootFS might be updated synchronously.
The check is activated by adding "sysfail-firmware-upd" to loader.conf
[1]
https://uefi.org/specs/UEFI/2.10/23_Firmware_Update_and_Reporting.html
