LogInit used to act as a manual way of registering the *necessary*
pkg/devicemapper logging callbacks. In addition, it was used to split up
the logic of pkg/devicemapper into daemon/graphdriver/devmapper (such
that some things were logged from libdm).
The manual aspect of this API was completely non-sensical and was just
begging for incorrect usage of pkg/devicemapper, so remove that semantic
and always register our own libdm callbacks.
In addition, recombine the split out logging callbacks into
pkg/devicemapper so that the default logger is local to the library and
also shown to be the recommended logger. This makes the code
substantially easier to read. Also the new DefaultLogger now has
configurable upper-bound for the log level, which allows for dynamically
changing the logging level.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
This enables deferred device deletion/removal by default if the driver
version in the kernel is new enough to support the feature.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The test was failing because TarOptions was using a non-pointer for
ChownOpts, which meant the check for nil was never true, and
createTarFile was never using the hdr.UID/GID
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Before this, if `forceRemove` is set the container data will be removed
no matter what, including if there are issues with removing container
on-disk state (rw layer, container root).
In practice this causes a lot of issues with leaked data sitting on
disk that users are not able to clean up themselves.
This is particularly a problem while the `EBUSY` errors on remove are so
prevalent. So for now let's not keep this behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
if initDevmapper failed after creating thin-pool, the thin-pool will not be removed,
this would cause we can't use the same lvm to create another thin-pool.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
when doing devices.cancelDeferredRemoval, the device could have been removed
and return ErrEnxio, but it continue to check if it is need to do suspend.
doSuspend := devinfo != nil && devinfo.Exists != 0 uses a devinfo which is
get before devices.cancelDeferredRemoval(baseInfo), it is outdate, the device
has been removed and there is no need to do suspend. If do suspend it will return
devicemapper: Error running deviceSuspend dm_task_run failed.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
I often get complains that container removal failed and users got following
error message.
"Driver devicemapper failed to remove root filesystem 18a69ba82aaf7a039ce7d44156215012d703001643079775190ac7dd6c6acf56:Device is Busy"
This error message talks about container id but does not give any info
about which particular device id is busy. Most likely device is mounted
in some other mount namespace and if one knows the device id, they
can try to do some debugging figuring which process and which mount
namespace is keeping the device busy and how did we reach that stage.
Without that information, it becomes almost impossible to debug the
problem.
So to improve the debuggability, when device removal fails, also return
device id in error message. Now new message looks as follows.
"Driver devicemapper failed to remove root filesystem 18a69ba82aaf7a039ce7d44156215012d703001643079775190ac7dd6c6acf56: Failed to remove device dbc15bdf9994a17c613d8ef9e924f3cffbf67f91e4f709295c901ad628377991:Device is Busy"
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
There is no need to populate device id during unregisterDevice(). Nobody
makes use of this information. We just need to remove file associated
with device and that file is looked up using the hash and not the
device id which is used for thin pool operations.
So get rid of device id argument to unregisterDevice().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This allows for easy extension of adding more parameters to existing
parameters list. Otherwise adding a single parameter changes code
at so many places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Fixed issue #23459
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
We just introduced a new tunable dm.xfs_nospace_max_retries. But this tunable
will work only on new kernels where xfs supports this feature. On older
kernels xfs does not allow tuning this behavior.
There are two issues. First one is that if xfsSetNospaceRetries() fails,
it returns error but leaves the device activated and mounted. We should
be unmounting the device and deactivate it before returning.
Second issue is, if docker is started on older kernel, with
dm.xfs_nospace_max_retries specified, then docker will silently ignore the
fact that /sys file to tweak this behavior is not present and will continue.
But I think it might be better to fail container creation/start if kernel
does not support this feature.
This patch fixes it. After this patch, user will get an error like following
when container is run.
# docker run -ti fedora bash
docker: Error response from daemon: devmapper: user specified daemon option dm.xfs_nospace_max_retries but it does not seem to be supported on this system :open /sys/fs/xfs/dm-5/error/metadata/ENOSPC/max_retries: no such file or directory.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
When xfs filesystem is being used on top of thin pool, xfs can get ENOSPC
errors from thin pool when thin pool is full. As of now xfs retries the
IO and keeps on retrying and does not give up. This can result in container
application being stuck for a very long time. In fact I have seen instances
of unkillable processes. So that means once thin pool is full and process
gets stuck, container can't be stopped/killed either and only option left
seems to be power recycle of the box.
In another instance, writer did not block but failed after a while. But
when I tried to exit/stop the container, unmounting xfs hanged and only
thing I could do was power cycle the machine.
Now upstream kernel has committed patches where it allows user space to
customize user space behavior in case of errors. One of the knobs is
max_retries, which specifies how many times an IO should be retried
when ENOSPC is encountered.
This patch sets provides a tunable knob (dm.xfs_nospace_max_retries) so
that user can specify value for max_retries and tune xfs behavior. If
one sets this value to 0, xfs will not retry IO when ENOSPC error is
encountered. It will instead give up and shutdown filesystem.
This knob can be useful if one is running into unkillable
processes/containers issue on top of xfs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Problem Description:
An example scenario that involves deferred removal
1. A new base image gets created (e.g. 'docker load -i'). The base device is activated and
mounted at some point in time during image creation.
2. While image creation is in progress, a privileged container is started
from another image and the host's mount name space is shared with this
container ('docker run --privileged -v /:/host').
3. Image creation completes and the base device gets unmounted. However,
as the privileged container still holds a reference on the base image
mount point, the base device cannot be removed right away. So it gets
flagged for deferred removal.
4. Next, the privileged container terminates and thus its reference to the
base image mount point gets released. The base device (which is flagged
for deferred removal) may now be cleaned up by the device-mapper. This
opens up an opportunity for a race between a 'kworker' thread (executing
the do_deferred_remove() function) and the Docker daemon (executing the
CreateSnapDevice() function).
This PR cancel the deferred removal, if the device is marked for it. And reschedule the
deferred removal later after the device is resumed successfully.
Signed-off-by: Shishir Mahajan <shishir.mahajan@redhat.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
device Base should not exists on failure:
--- FAIL: TestDevmapperCreateBase (0.06s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-079240530/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.00s)
graphtest_unix.go:219: devmapper: device Base already
exists.
it should be:
--- FAIL: TestDevmapperCreateBase (0.25s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.13s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Snap/rootfs/a subdir:
no such file or directory
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
1) docker create / run / start: this would create a snapshot device and mounts it onto the filesystem.
So the first time GET operation is called. it will create the rootfs directory and return the path to rootfs
2) Now when I do docker commit. It will call the GET operation second time. This time the refcount will check
that the count > 1 (count=2). so the rootfs already exists, it will just return the path to rootfs.
Earlier it was just returning the mp: /var/lib/docker/devicemapper/mnt/{ID} and hence the inconsistent paths error.
Signed-off-by: Shishir Mahajan <shishir.mahajan@redhat.com>
For things that we can check if they are mounted by using their fsmagic
we should use that and for others do it the slow way.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This makes sure fsdiff doesn't try to unmount things that shouldn't be.
**Note**: This is intended as a temporary solution to have as minor a
change as possible for 1.11.1. A bigger change will be required in order
to support container re-attach.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Right now there is no way to know what's the minimum free space threshold
daemon is applying. It would be good to export it through docker info and
then user knows what's the current value. Also this could be useful to
higher level management tools which can look at this value and setup their
own internal thresholds for image garbage collection etc.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
