This change cleans up the SetClusterProvider method.
Swarm calls the SetClusterProvider to pass to libnetwork the pointer
of the provider from which libnetwork can fetch all the information to
initialize the internal agent.
The method can be and is called multiple times passing the same value,
with the previous logic that was erroneusly spawning multiple go routines that
were making possiblea race between an agentInit and an agentClose.
The new logic aims to disallow it by checking for the provider passed and
ensuring that if the provider is already present there is nothing to do because
there is already an active go routine that is ready to process cluster events.
Moreover a patch on moby side takes care of clearing up the Cluster Events
dispacthing using only 1 channel to handle all the events types.
This will also guarantee in order event handling because now all the events are
piped into one single channel.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Change in the provider interface to let the provider
return the whole list of managers.
This will allow the netwrok db to have multiple choice
to establish the first adjacencies
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
During configuration in SWARM mode is now possible to pass an additional
parameter --data-path-addr <ip|interface>.
The information is going to be used to configure which is the interface
that is going to be used for the data path for global scope drivers.
Up to now the only driver really using this extra parameter is the
overlay driver.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Fixdocker/docker#27539
After io.Copy(to, from), we should call to.CloseWrite(), not to.CloseRead().
Without this fix, TestTCP4ProxyHalfClose (newly added in this commit) fails as
follows:
--- FAIL: TestTCP4ProxyHalfClose (0.00s)
network_proxy_test.go:135: EOF
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
- Disable ipv6 on all interface by default at sandbox creation.
Enable IPv6 per interface basis if the interface has an IPv6
address. In case sandbox has an IPv6 interface, also enable
IPv6 on loopback interface.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This fix tries to address the issue raised in:
https://github.com/docker/docker/issues/26341
where multiple addresses in a bridge may cause `--fixed-cidr` to
not have the correct addresses.
The issue is that `netutils.ElectInterfaceAddresses(bridgeName)`
only returns the first IPv4 address.
This fix changes `ElectInterfaceAddresses()` and `addresses()`
so that all IPv4 addresses are returned. This will allow the
possibility of selectively choose the address needed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This simplifies how we build it in docker/docker as no vendoring needed,
and this does program not use any logrus features.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
As part of daemon init, network and ipam drivers are passed a
pluginstore object that implements the plugin/getter interface. Use this
interface methods in libnetwork to interact with network plugins. This
interface provides the new and improved pluginv2 functionality and falls
back to pluginv1 (legacy) if necessary.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
If user provided a non-zero listen address, honor that and bind only to
that address. Right now it is not honored and we always bind to all ip
addresses in the host.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
With this change, all the auto-detection of the addresses are removed
from libnetwork and the caller takes the responsibilty to have a proper
advertise-addr in various scenarios (including externally facing public
advertise-addr with an internal facing private listen-addr)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Rather than re-execing docker as the proxy, create a new command docker-proxy
that is much smaller to save memory in the case where there are a lot of
procies being created. Also allows the proxy to be replaced, for example
in Docker for Mac we have a proxy that proxies to osx instead of locally.
This is the vendoring pull for https://github.com/docker/docker/pull/23312
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
With the introduction of a driver generic gossip in libnetwork it is not
necessary for drivers to run their own gossip protocol (like what
overlay driver is doing currently) but instead rely on the gossip
instance run centrally in libnetwork. In order to achieve this, certain
enhancements to driver api are needed. This api aims to provide these
enhancements.
The new api provides a way for drivers to register interest on table
names of their choice by returning a list of table names of interest as
a response to CreateNetwork. By doing that they will get notified if a
CRUD operation happened on the tables of their interest, via the newly
added EventNotify call.
Drivers themselves can add entries to any table during a Join call by
invoking AddTableEntry method any number of times during the Join
call. These entries lifetime is the same as the endpoint itself. As soon
as the container leaves the endpoint, those entries added by driver
during that endpoint's Join call will be automatically removed by
libnetwork. This action may trigger notification of such deletion to all
driver instances in the cluster who have registered interest in that
table's notification.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently the libnetwork function `NewNetwork` does not allow
caller to pass a network ID and it is always generated internally.
This is sufficient for engine use. But it doesn't satisfy the needs
of libnetwork being used as an independent library in programs other
than the engine. This enhancement is one of the many needed to
facilitate a generic libnetwork.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently ipam/ipamutils has a bunch of dependencies
in osl and netlink which makes the ipam/ipamutils harder
to use independently with other applications. This PR
modularizes ipam/ipamutils into a standalone package
with no OS level dependencies.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- runs to completion without error
- demonstrates info available when using bridge network driver
Closes#837
Signed-off-by: Gabe Rosenhouse <grosenhouse@pivotal.io>
Added IT cases for external connectivity check for bridge
and overlay networks, both initially and after a restart.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Added restart test for default network so that we can test
bridge network persistence. Also added changes to dnet to
delete the default network if it is present.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Set bridge ipv4 address when bridge is present
- IPv6 changes for bridge
- Convert unit tests to the new model
Signed-off-by: Alessandro Boch <aboch@docker.com>
- Renamed netlabel prefixes to accomodate both global
and local store configs.
- Added a `private` marker.
- Skipping the data store configs for remote driver
so that external plugins don't get it as there is
no secure and sane way to coordinate providing
data store access to external plugins.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Always on watching of networks and endpoints can
affect scalability of the cluster beyond a few nodes.
Remove pro active watching and watch only the objects
you are interested in.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
* integrated hostdiscovery package with the new Docker Discovery
* Integrated hostdiscovery package with libnetwork core
* removed libnetwork_discovery tag
* Introduced driver apis for discovery events
* moved overlay driver to make use of the discovery events
* Using Docker Discovery service.
* Changed integration-tests to make use of the new discovery
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Replaced it with DisableBridgeCreation and it can be used ONLY in
a special case for docker0 bridge from docker, instead of calling it
from all other case.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
