The BuildCache.Parent field was removed in API v1.42 in [moby@e0db820].
While we had to keep the Go struct field around to backfil the field for
older API versions, it's no longer part of API v1.42 and up (using the
"omitempty" is just an implementation detail).
This patch corrects the swagger files to match this.
[moby@e0db820]: e0db8207f3
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a5d9619093)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The image inspect response has various fields that were deprecated as
part of the legacy builder, or Dockerfile syntax;
- The `Parent` field is only used for the legacy builder, and only set for
images that are built locally (i.e., not persisted when pulling an image).
- The `DockerVersion` field is only set when building images with the legacy
builder, and empty in most cases.
This patch deprecates the fields in the `InspectResponse` go struct, as
these fields will no longer be set in future once the legacy builder is
removed (`Parent`, `DockerVersion`). The legacy builder's deprecation in
[cli@4d8e457] / [cli@fd22746] (docker 23.0, API v1.42), however the related
API fields were kept so that information of legacy images would not be
discarded.
The API continues to return these fields if set, allowing the client to
print the fields for informational purposes when printing the raw response,
but these fields should be considered "transitional", and not be depended
on; deprecating the fields helps raise awareness.
[cli@4d8e457]: 4d8e45782b
[cli@fd22746]: fd2274692f
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit bd8a99b400)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `VirtualSize` field was deprecated in [moby@1261fe6], and omitted / removed
in API v1.44 in [moby@913b0f5]. We should not document the field as part of
those API versions as it no longer exists for those.
[moby@1261fe6]: 1261fe69a3
[moby@913b0f5]: 913b0f51ca
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 51cbd2ed16)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting with kernel v6.12, kernel memory TCP accounting is deprecated for cgroups v1.
Note: kernel memory TCP accounting is not supported by cgroups v2.
See d046ff46ee
Signed-off-by: Austin Vazquez <austin.vazquez@docker.com>
(cherry picked from commit fb2f8115c8)
Signed-off-by: Austin Vazquez <austin.vazquez@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was no longer used since Docker 1.11 (API version 1.23)
through [moby@aee260d] and [engine-api@9a9e468] but kept and deprecated
in [engine-api@167efc7], however the docs still used it in an example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 08d014cac8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `BridgeNfIptables` and `BridgeNfIp6tables` were removed in API v1.50
in commit 6505d3877c, and only returned in
lower API versions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 0fb46d08ad)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This example was added in 5e0e34fafd so that
the deprecated fields could be omitted from the example. Those fields were
removed from the swagger in 4dc961d0e9, but
the temporary example was not removed.
This patch removes the example, in favor of the per-field examples, which
were already in place.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7bfbb6e8ca)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This field provides little value as it's only set when the daemon is
started with --bridge flag specified, and the inspected container is
connected to the default bridge network.
Unfortunately, there's no equivalent field in NetworkSettings.Networks.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 16dc39136c)
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The Email field was originally used to create a new Docker Hub account
through the `docker login` command. The `docker login` command could be
used both to log in to an existing account (providing only username and
password), or to create a new account (providing desired username and
password, and an e-mail address to use for the new account).
This functionality was confusing, because it was implemented when Docker
Hub was the only registry, but the same functionality could not be used
for other registries. This functionality was removed in Docker 1.11 (API
version 1.23) through [moby@aee260d], which also removed the Email field
([engine-api@9a9e468]) as it was no longer used.
However, this caused issues when using a new CLI connecting with an old
daemon, as the field would no longer be serialized, and the deprecation
may not yet be picked up by custom registries, so [engine-api@167efc7]
added the field back, deprecated it, and added an "omitempty". There
was no official "deprecated" format yet at the time, so let's make sure
the deprecation follows the proper format to make sure it gets noticed.
[moby@aee260d]: aee260d4eb
[engine-api@9a9e468]: 9a9e468f50
[engine-api@167efc7]: 167efc72bb
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 6cfff7e880)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This parameter was already supported for some time in the backend (for
purposes related to docker system prune). It was also already present in
the imagetypes.ListOptions but was never actually handled by the client.
Make it available by default in the response.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
More recent versions of go-swagger failed on this, because the value
is interpolated as JSON numberic value, which assumes int64 (signed).
Quote the value to prevent it being handled before validated against
uint64.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change adds the ability to delete a specific platform from a
multi-platform image.
Previously, image deletion was an all-or-nothing operation - when
deleting a multi-platform image, all platforms would be removed
together. This change allows users to selectively remove individual
platforms from a multi-architecture image while keeping other platforms
intact.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
commit af0cdc36c7 marked these fields as
deprecated and to be removed in API v1.47 (which was targeted for v28.0).
We shipped v1.47 with the v27.2 release, but did not yet remove the erroneous
fields, so the version to deprecate was updated to v1.48 through
3df03d8e66
This patch removes fields that are not part of the image by replacing the
type with the Config struct from the docker image-spec.
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.50/images/alpine/json | jq .Config
{
"Env": [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
],
"Cmd": [
"/bin/sh"
]
}
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.49/images/alpine/json | jq .Config
{
"Hostname": "",
"Domainname": "",
"User": "",
"AttachStdin": false,
"AttachStdout": false,
"AttachStderr": false,
"Tty": false,
"OpenStdin": false,
"StdinOnce": false,
"Env": [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
],
"Cmd": [
"/bin/sh"
],
"Image": "",
"Volumes": null,
"WorkingDir": "",
"Entrypoint": null,
"OnBuild": null,
"Labels": null
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add ability for the device driver to implement a device discovery
mechanism and expose discovered devices in the `docker info` output.
Currently it's only implemented for CDI devices.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
- registry.ServiceConfig: add a "ExtraFields" for outputting deprecated
fields.
- remove uses of AllowNondistributableArtifactsCIDRs and AllowNondistributableArtifactsHostnames
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Report FirewallBackend in "docker info".
It's currently "iptables" or "iptables+firewalld" on Linux, and
omitted on Windows.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Create a ContainerInspectResponse definition and Use the example fields
as defined in the definition; add additional examples in that definition
where missing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the example fields as defined in the ContainerSummary definition,
and add additional examples in that definition where missing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- error (ErrorMessage) was deprecated in 3043c26419
which was part of docker v0.6.0 / API v1.4
- progress (ProgressMessage) was deprecated in 597e0e69b4
which was part of docker v0.7.1 / API v1.8
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move api/types.IDResponse to a "common" package (to prevent cyclic import
issues), and introduce a container.CommitResponse type as alias. This allows
consumers to use ContainerCommit without having to import the "types" package,
and allows us to differentiate the response for container commit separate from
other endpoints currently using IDResponse.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add `Manifests` field to image inspect (`/images/{name}/json`) response.
This is the same as in `/images/json`.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This wires up the new gc types that buildkit exposes in version 0.17.
The previous flag, `KeepBytes`, was renamed to `ReservedBytes` and two
new options, `MaxUsed` and `MinFree` were added.
`MaxUsed` corresponds to the maximum amount of space that buildkit will
use for the build cache and `MinFree` amount of free disk space for the
system to prevent the cache from using that space. This allows greater
configuration of the cache storage usage when used in situations where
docker is not the only service on the system using disk space.
Signed-off-by: Jonathan A. Sternberg <jonathan.sternberg@docker.com>
