full diff: https://github.com/opencontainers/runc/compare/v1.1.2...v1.1.3
This is the third release of the 1.1.z series of runc, and contains
various minor improvements and bugfixes.
- Our seccomp `-ENOSYS` stub now correctly handles multiplexed syscalls on
s390 and s390x. This solves the issue where syscalls the host kernel did not
support would return `-EPERM` despite the existence of the `-ENOSYS` stub
code (this was due to how s390x does syscall multiplexing).
- Retry on dbus disconnect logic in libcontainer/cgroups/systemd now works as
intended; this fix does not affect runc binary itself but is important for
libcontainer users such as Kubernetes.
- Inability to compile with recent clang due to an issue with duplicate
constants in libseccomp-golang.
- When using systemd cgroup driver, skip adding device paths that don't exist,
to stop systemd from emitting warnings about those paths.
- Socket activation was failing when more than 3 sockets were used.
- Various CI fixes.
- Allow to bind mount `/proc/sys/kernel/ns_last_pid` to inside container.
- runc static binaries are now linked against libseccomp v2.5.4.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 0167e55abd)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the second patch release of the runc 1.1 release branch. It
fixes CVE-2022-29162, a minor security issue (which appears to not be
exploitable) related to process capabilities.
This is a similar bug to the ones found and fixed in Docker and
containerd recently (CVE-2022-24769).
- A bug was found in runc where runc exec --cap executed processes with
non-empty inheritable Linux process capabilities, creating an atypical Linux
environment. For more information, see GHSA-f3fp-gc8g-vw66 and CVE-2022-29162.
- runc spec no longer sets any inheritable capabilities in the created
example OCI spec (config.json) file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 25858d621f)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the github.com/stevvooe/protobuild@v0.1.0 module was renamed to
github.com/containerd/protobuild, but go modules ignores the
rename and pulls v0.2.0 (which is after the rename)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
golint has been deprecated and replaced by revive since v1.41.0.
Signed-off-by: Kazuyoshi Kato <katokazu@amazon.com>
(cherry picked from commit 4dd5ca70fb)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/cpuguy83/go-md2man/compare/v2.0.0...v2.0.1
- Fix handling multiple definition descriptions
- Fix inline markup causing table cells to split
- Remove escaping tilde character (prevents tildes (`~`) from disappearing).
- Do not escape dash, underscore, and ampersand (prevents ampersands (`&`) from disappearing).
- Ignore unknown HTML tags to prevent noisy warnings
Note that this only updates the binaries we install. The vendor code also
includes go-md2man (as indirect dependency of urfave/cli). I don't think we use that
feature, so I did not add it to our go.mod
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d2b6d192db)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently, the cri-integration tests do not work on Windows due to various reasons.
One of the reasons is because all the tests are using Linux-specific images. This
commit refactors the image pulling / usage in the cri-integration tests, making it
easier to update, and easier to configure the a custom registry to pull those images
from.
For Windows runs, custom registries can be created, which will also contain Windows
images, and the cri-integration tests can be configured to use those registries by
specifying the "--image-list" argument, a TOML file which will contain an alternative
mapping of the default images.
Signed-off-by: Claudiu Belu <cbelu@cloudbasesolutions.com>
This allows us to dig more details out of test runs and maintain a
better history.
For this we can use `gotestsum`, which is a utility that wraps `go test`
so that it outputs test2json (go's format) and output junit (a format
more easily imported into other systems).
The PR makes it possible to override the Makefile's use of `go test` to
use any other command tto executet the test. For CI we'll use `gotestsum
--`, where `gotestsum` expects everything after the `--` to be flags for
`go test`.
We then use environment variables to configure `gotestsum` (e.g.
`GOTESTSUM_JUNITFILE` is an env var accepted by `gotestsum`).
For cri tests, the test suite supports outputing test results to a
directory, these are in junit format already. The file is not named
properly just because the code that creates it (in ginkgo) is not
configured well. We can fix that upstream to give us a better name...
until then I'm keeping those results in a separate dir.
A second workflow is also added so the test results can be summed up and
a report added to the workflow run. The 2nd workflow is required for
this since PR runs do not have access to do some of this due to safety
reasons
(https://securitylab.github.com/research/github-actions-preventing-pwn-requests/)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Both runc and containerd use BUILDTAGS to customize go build-tags.
When building containerd with custom build-tags, runc inherited
those, causing the default to be overwritten, e.g.;
make BUILDTAGS=no_btrfs cri-cni-release
(in script/setup/install-runc)
HEAD is now at 12644e61 VERSION: release 1.0.0~rc93
make[1]: Entering directory '/tmp/tmp.ZJzc2KtI0A/runc'
go build -trimpath "-mod=vendor" "-buildmode=pie" -tags "no_btrfs" -ldflags "-X main.gitCommit="12644e614e25b05da6fd08a38ffa0cfe1903fdec" -X main.version=1.0.0-rc93 " -o runc .
^^^^^^^^^^^^^^^^
This patch brings back the BUILDTAGS make-var in the runc-install
script, which fixates the buildtags to our defaults.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This moves the runc version to build to scripts/setup/runc-version,
which makes it easier for packagers to find the default version
to use.
The RUNC_VERSION environment variable can still be used to override
the version, which can be used (e.g.) to test against different versions
in our CI.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that the dependency on runc (libcontaienr) code has been reduced
considerably, it is probbaly ok to cut the version dependency between
libcontainer and the runc binary that is supported.
This patch separates the runc binary version from the version of
libcontainer that is defined in go.mod, and updates the documentation
accordingly.
The RUNC_COMMIT variable in the install-runc script is renamed to
RUNC_VERSION to encourage using tagged versions, and the Dockerfile
in contrib is updated to allow building with a custom version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the runc v1.0.0-rc93 release notes:
> The "selinux" and "apparmor" buildtags have been removed, and now all runc
> builds will have SELinux and AppArmor support enabled. Note that "seccomp"
> is still optional (though we very highly recommend you enable it).
Also adding a note about kmem support.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`go get -d` uses go modules by default in Go 1.16 and up, which results
in modules being fetched for the "latest" module version, after which we
tried to "git checkout" to `<VERSION>`.
For runc, this means that (possibly incorrectly), `go get` will download
runc `v0.1.1` (most recent non-"pre-release", which caused failures (e.g
the old `Sirupsen/logrus` being downloaded).
In addition, some of the dependencies we're installing use vendoring, and
thus would not require the modules to be downloaded (and vendored files
will be ignored when using `go get` with modules).
This patch switches several uses `go get -d` to use a regular
git clone, after which the desired version is checked out,
and the binaries are built.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Phil Estes <estesp@amazon.com>
Qiutong Song